Meet our Refill LumberLay filaments – a unique material that has the look and feel of real wood.

Refill LumberLay filaments were designed to be used with a Master Spool to help reduce waste and improve sustainable 3D printing practices. Moreover, they combine 40% of recycled wood and 60% of PLA filament. Because of this mix, your prints will have the appearance of natural wood, and the physical properties of the product will be extremely similar to natural wood.

Our Refills can also be used with Bambu Lab Reusable Spool.

Please note: The LumberLay filaments must be dried before use (8 hours at 55°C) and are not compatible with a 0.2 mm nozzle.

Printing recommendations:

• The filament must be dried before use (8 hours at 55°C).
• LumberLay filaments are not compatible with a 0.2 mm nozzle.
• For the best results, print at 200–230°C.
• Recommended printing table temperature is 60°C.
• Use a glass bed, PEI sheet, Kapton, or Blue tape for the build platform with 3Dlac spray.

*Ideal temperature may vary when using different printers.

Why choose AzureFilm Refill filaments?

• We removed the plastic zip ties and replaced them with a better option to make unpacking easier.
• The filament tail is now completely straight. That prevents it from getting stuck in the spool and ruining your print when the filament runs out.
• Perfect compatibility with AzureFilm and Bambu Lab spools.

Our Refill PLA Lumberlay filaments are perfectly compatible with the AzureFilm Master Spool – the only spool you’ll ever need. By using this reusable spool, you can join us in reducing waste and minimising environmental impact.

AzureFilm Master Spool is our reusable spool, which provides a sustainable and cost-effective solution for 3D printing. The spool is a set of two reusable, injection-molded discs. This ensures the high durability and precision of the spool.

By purchasing and reusing our Master Spool you contribute to a cleaner environment while enjoying a reliable and easy-to-use product, compatible with most 3D printers.

Our Refills can also be used with Bambu Lab Reusable Spool.

Features and properties

To know more about Lumberlay filaments, read our blog.

You can access the Technical Data Sheet here.

Meet our Refill LumberLay filaments – a unique material that has the look and feel of real wood.

Refill LumberLay filaments were designed to be used with a Master Spool to help reduce waste and improve sustainable 3D printing practices. Moreover, they combine 40% of recycled wood and 60% of PLA filament. Because of this mix, your prints will have the appearance of natural wood, and the physical properties of the product will be extremely similar to natural wood.

Our Refills can also be used with Bambu Lab Reusable Spool.

Please note: The LumberLay filaments must be dried before use (8 hours at 55°C) and are not compatible with a 0.2 mm nozzle.

Printing recommendations:

• The filament must be dried before use (8 hours at 55°C).
• LumberLay filaments are not compatible with a 0.2 mm nozzle.
• For the best results, print at 200–230°C.
• Recommended printing table temperature is 60°C.
• Use a glass bed, PEI sheet, Kapton, or Blue tape for the build platform with 3Dlac spray.

*Ideal temperature may vary when using different printers.

Why choose AzureFilm Refill filaments?

• We removed the plastic zip ties and replaced them with a better option to make unpacking easier.
• The filament tail is now completely straight. That prevents it from getting stuck in the spool and ruining your print when the filament runs out.
• Perfect compatibility with AzureFilm and Bambu Lab spools.

Our Refill PLA Lumberlay filaments are perfectly compatible with the AzureFilm Master Spool – the only spool you’ll ever need. By using this reusable spool, you can join us in reducing waste and minimising environmental impact.

AzureFilm Master Spool is our reusable spool, which provides a sustainable and cost-effective solution for 3D printing. The spool is a set of two reusable, injection-molded discs. This ensures the high durability and precision of the spool.

By purchasing and reusing our Master Spool you contribute to a cleaner environment while enjoying a reliable and easy-to-use product, compatible with most 3D printers.

Our Refills can also be used with Bambu Lab Reusable Spool.

Features and properties

To know more about Lumberlay filaments, read our blog.

You can access the Technical Data Sheet here.

Meet our Refill LumberLay filaments – a unique material that has the look and feel of real wood.

Refill LumberLay filaments were designed to be used with a Master Spool to help reduce waste and improve sustainable 3D printing practices. Moreover, they combine 40% of recycled wood and 60% of PLA filament. Because of this mix, your prints will have the appearance of natural wood, and the physical properties of the product will be extremely similar to natural wood.

Our Refills can also be used with Bambu Lab Reusable Spool.

Please note: The LumberLay filaments must be dried before use (8 hours at 55°C) and are not compatible with a 0.2 mm nozzle.

Printing recommendations:

• The filament must be dried before use (8 hours at 55°C).
• LumberLay filaments are not compatible with a 0.2 mm nozzle.
• For the best results, print at 200–230°C.
• Recommended printing table temperature is 60°C.
• Use a glass bed, PEI sheet, Kapton, or Blue tape for the build platform with 3Dlac spray.

*Ideal temperature may vary when using different printers.

Why choose AzureFilm Refill filaments?

• We removed the plastic zip ties and replaced them with a better option to make unpacking easier.
• The filament tail is now completely straight. That prevents it from getting stuck in the spool and ruining your print when the filament runs out.
• Perfect compatibility with AzureFilm and Bambu Lab spools.

Our Refill PLA Lumberlay filaments are perfectly compatible with the AzureFilm Master Spool – the only spool you’ll ever need. By using this reusable spool, you can join us in reducing waste and minimising environmental impact.

AzureFilm Master Spool is our reusable spool, which provides a sustainable and cost-effective solution for 3D printing. The spool is a set of two reusable, injection-molded discs. This ensures the high durability and precision of the spool.

By purchasing and reusing our Master Spool you contribute to a cleaner environment while enjoying a reliable and easy-to-use product, compatible with most 3D printers.

Our Refills can also be used with Bambu Lab Reusable Spool.

Features and properties

To know more about Lumberlay filaments, read our blog.

You can access the Technical Data Sheet here.

Meet our Refill LumberLay filaments – a unique material that has the look and feel of real wood.

Refill LumberLay filaments were designed to be used with a Master Spool to help reduce waste and improve sustainable 3D printing practices. Moreover, they combine 40% of recycled wood and 60% of PLA filament. Because of this mix, your prints will have the appearance of natural wood, and the physical properties of the product will be extremely similar to natural wood.

Our Refills can also be used with Bambu Lab Reusable Spool.

Please note: The LumberLay filaments must be dried before use (8 hours at 55°C) and are not compatible with a 0.2 mm nozzle.

Printing recommendations:

• The filament must be dried before use (8 hours at 55°C).
• LumberLay filaments are not compatible with a 0.2 mm nozzle.
• For the best results, print at 200–230°C.
• Recommended printing table temperature is 60°C.
• Use a glass bed, PEI sheet, Kapton, or Blue tape for the build platform with 3Dlac spray.

*Ideal temperature may vary when using different printers.

Why choose AzureFilm Refill filaments?

• We removed the plastic zip ties and replaced them with a better option to make unpacking easier.
• The filament tail is now completely straight. That prevents it from getting stuck in the spool and ruining your print when the filament runs out.
• Perfect compatibility with AzureFilm and Bambu Lab spools.

Our Refill PLA Lumberlay filaments are perfectly compatible with the AzureFilm Master Spool – the only spool you’ll ever need. By using this reusable spool, you can join us in reducing waste and minimising environmental impact.

AzureFilm Master Spool is our reusable spool, which provides a sustainable and cost-effective solution for 3D printing. The spool is a set of two reusable, injection-molded discs. This ensures the high durability and precision of the spool.

By purchasing and reusing our Master Spool you contribute to a cleaner environment while enjoying a reliable and easy-to-use product, compatible with most 3D printers.

Our Refills can also be used with Bambu Lab Reusable Spool.

Features and properties

To know more about Lumberlay filaments, read our blog.

You can access the Technical Data Sheet here.

Meet our Refill LumberLay filaments – a unique material that has the look and feel of real wood.

Refill LumberLay filaments were designed to be used with a Master Spool to help reduce waste and improve sustainable 3D printing practices. Moreover, they combine 40% of recycled wood and 60% of PLA filament. Because of this mix, your prints will have the appearance of natural wood, and the physical properties of the product will be extremely similar to natural wood.

Our Refills can also be used with Bambu Lab Reusable Spool.

Please note: The LumberLay filaments must be dried before use (8 hours at 55°C) and are not compatible with a 0.2 mm nozzle.

Printing recommendations:

• The filament must be dried before use (8 hours at 55°C).
• LumberLay filaments are not compatible with a 0.2 mm nozzle.
• For the best results, print at 200–230°C.
• Recommended printing table temperature is 60°C.
• Use a glass bed, PEI sheet, Kapton, or Blue tape for the build platform with 3Dlac spray.

*Ideal temperature may vary when using different printers.

Why choose AzureFilm Refill filaments?

• We removed the plastic zip ties and replaced them with a better option to make unpacking easier.
• The filament tail is now completely straight. That prevents it from getting stuck in the spool and ruining your print when the filament runs out.
• Perfect compatibility with AzureFilm and Bambu Lab spools.

Our Refill PLA Lumberlay filaments are perfectly compatible with the AzureFilm Master Spool – the only spool you’ll ever need. By using this reusable spool, you can join us in reducing waste and minimising environmental impact.

AzureFilm Master Spool is our reusable spool, which provides a sustainable and cost-effective solution for 3D printing. The spool is a set of two reusable, injection-molded discs. This ensures the high durability and precision of the spool.

By purchasing and reusing our Master Spool you contribute to a cleaner environment while enjoying a reliable and easy-to-use product, compatible with most 3D printers.

Our Refills can also be used with Bambu Lab Reusable Spool.

Features and properties

To know more about Lumberlay filaments, read our blog.

You can access the Technical Data Sheet here.

Meet our Refill LumberLay filaments – a unique material that has the look and feel of real wood.

Refill LumberLay filaments were designed to be used with a Master Spool to help reduce waste and improve sustainable 3D printing practices. Moreover, they combine 40% of recycled wood and 60% of PLA filament. Because of this mix, your prints will have the appearance of natural wood, and the physical properties of the product will be extremely similar to natural wood.

Our Refills can also be used with Bambu Lab Reusable Spool.

Please note: The LumberLay filaments must be dried before use (8 hours at 55°C) and are not compatible with a 0.2 mm nozzle.

Printing recommendations:

• The filament must be dried before use (8 hours at 55°C).
• LumberLay filaments are not compatible with a 0.2 mm nozzle.
• For the best results, print at 200–230°C.
• Recommended printing table temperature is 60°C.
• Use a glass bed, PEI sheet, Kapton, or Blue tape for the build platform with 3Dlac spray.

*Ideal temperature may vary when using different printers.

Why choose AzureFilm Refill filaments?

• We removed the plastic zip ties and replaced them with a better option to make unpacking easier.
• The filament tail is now completely straight. That prevents it from getting stuck in the spool and ruining your print when the filament runs out.
• Perfect compatibility with AzureFilm and Bambu Lab spools.

Our Refill PLA Lumberlay filaments are perfectly compatible with the AzureFilm Master Spool – the only spool you’ll ever need. By using this reusable spool, you can join us in reducing waste and minimising environmental impact.

AzureFilm Master Spool is our reusable spool, which provides a sustainable and cost-effective solution for 3D printing. The spool is a set of two reusable, injection-molded discs. This ensures the high durability and precision of the spool.

By purchasing and reusing our Master Spool you contribute to a cleaner environment while enjoying a reliable and easy-to-use product, compatible with most 3D printers.

Our Refills can also be used with Bambu Lab Reusable Spool.

Features and properties

To know more about Lumberlay filaments, read our blog.

You can access the Technical Data Sheet here.

Do you want a unique 3D product that has a smell of wood and the touch reminds you of wooden surfaces? You are at the right address because for you we produced LES filament, which combines 40 percent of recycled wood and 60 percent of polymers. This excellent blend allows this type of filament to be extruded with similar characteristics as PLA; similar heat resistance is particularly important. The printed products have both the scent and the appearance of natural wood, and the physical properties of the product are extremely similar to natural wood.
For good results, you must print at a temperature of 200-210°C and the printing table should be heated to 60°C. Please note that the range in the print temperature may slightly differ depending on the use of other printers.

PLA wooden filament with a net weight of 0.75 kg (1.65 lbs), on a reel with an outer diameter of 210 mm, with an inside opening of 60 mm and a width of 62 mm. The filament is vacuum-sealed and contains a bag that absorbs moisture and allows the filament to remain fresh. The thickness of PLA wooden filament is 1.75 mm or 2.85 mm and it is manufactured in three types: PINE, BAMBOO, and CORK.

Our WOOD filament is perfectly printed using almost all 3D printers, including RepRap and MakerBot printers, Ultimaker, BCN3D, Airwolf3D, Makergear, Printrbot, IRA3D, Orres and many more.

CHARACTERISTICS OF AZUREFILM WOOD FILAMENT:
1. Good adaptability and flexibility.
2. You do not need a closed printer to print.
3. High quality texture of wood particles.
4. Low degree of shrinkage during the printing process and the strength of the material.
5. The plastic thread melts and extrudes like all other 3D filaments.
6. Printed 3D products can be painted, cut as wood and grind or sanded.
7. AzureFilm Wood Bamboo is an environmentally friendly material.
8. The material has an extremely low bending degree.
9. Plastic thread AzureFilm Wood Bamboo perfectly adheres to the printing table.
10. The material has excellent flow properties.
11. Plastic thread AzureFilm Wood Bamboo must be kept in a dry place and at suitable temperatures.

Do you want a unique 3D product that has a smell of wood and the touch reminds you of wooden surfaces? You are at the right address because for you we produced LES filament, which combines 40 percent of recycled wood and 60 percent of polymers. This excellent blend allows this type of filament to be extruded with similar characteristics as PLA; similar heat resistance is particularly important. The printed products have both the scent and the appearance of natural wood, and the physical properties of the product are extremely similar to natural wood.
For good results, you must print at a temperature of 200-210°C and the printing table should be heated to 60°C. Please note that the range in the print temperature may slightly differ depending on the use of other printers.

PLA wooden filament with a net weight of 0.75 kg (1.65 lbs), on a reel with an outer diameter of 210 mm, with an inside opening of 60 mm and a width of 62 mm. The filament is vacuum-sealed and contains a bag that absorbs moisture and allows the filament to remain fresh. The thickness of PLA wooden filament is 1.75 mm or 2.85 mm and it is manufactured in three types: PINE, BAMBOO, and CORK.

Our WOOD filament is perfectly printed using almost all 3D printers, including RepRap and MakerBot printers, Ultimaker, BCN3D, Airwolf3D, Makergear, Printrbot, IRA3D, Orres and many more.

CHARACTERISTICS OF AZUREFILM WOOD FILAMENT:
1. Good adaptability and flexibility.
2. You do not need a closed printer to print.
3. High quality texture of wood particles.
4. Low degree of shrinkage during the printing process and the strength of the material.
5. The plastic thread melts and extrudes like all other 3D filaments.
6. Printed 3D products can be painted, cut as wood and grind or sanded.
7. AzureFilm Wood Bamboo is an environmentally friendly material.
8. The material has an extremely low bending degree.
9. Plastic thread AzureFilm Wood Bamboo perfectly adheres to the printing table.
10. The material has excellent flow properties.
11. Plastic thread AzureFilm Wood Bamboo must be kept in a dry place and at suitable temperatures.

Do you want a unique 3D product that has a smell of wood and the touch reminds you of wooden surfaces? You are at the right address because for you we produced LES filament, which combines 40 percent of recycled wood and 60 percent of polymers. This excellent blend allows this type of filament to be extruded with similar characteristics as PLA; similar heat resistance is particularly important. The printed products have both the scent and the appearance of natural wood, and the physical properties of the product are extremely similar to natural wood.
For good results, you must print at a temperature of 200-210°C and the printing table should be heated to 60°C. Please note that the range in the print temperature may slightly differ depending on the use of other printers.

PLA wooden filament with a net weight of 0.75 kg (1.65 lbs), on a reel with an outer diameter of 210 mm, with an inside opening of 60 mm and a width of 62 mm. The filament is vacuum-sealed and contains a bag that absorbs moisture and allows the filament to remain fresh. The thickness of PLA wooden filament is 1.75 mm or 2.85 mm and it is manufactured in three types: PINE, BAMBOO, and CORK.

Our WOOD filament is perfectly printed using almost all 3D printers, including RepRap and MakerBot printers, Ultimaker, BCN3D, Airwolf3D, Makergear, Printrbot, IRA3D, Orres and many more.

CHARACTERISTICS OF AZUREFILM WOOD FILAMENT:
1. Good adaptability and flexibility.
2. You do not need a closed printer to print.
3. High quality texture of wood particles.
4. Low degree of shrinkage during the printing process and the strength of the material.
5. The plastic thread melts and extrudes like all other 3D filaments.
6. Printed 3D products can be painted, cut as wood and grind or sanded.
7. AzureFilm Wood Bamboo is an environmentally friendly material.
8. The material has an extremely low bending degree.
9. Plastic thread AzureFilm Wood Bamboo perfectly adheres to the printing table.
10. The material has excellent flow properties.
11. Plastic thread AzureFilm Wood Bamboo must be kept in a dry place and at suitable temperatures.