Περιγραφή
Refill PLA Skin – natural tones for realistic-looking prints
Easy to print & ideal for beginners
Fits our Master Spool & Bambu Reusable Spool
Natural skin-tone colors
Great for realistic models
Refill PLA Skin is best for…
Realistic figures & busts
Human figures, statues, miniatures and busts in natural-looking tones
Cosplay props & details
Wearable props, costume details, masks and accessories in skin tones
Medical & educational models
Anatomy models, demonstration parts, training aids and learning models
Artistic & creative prints
Sculptures, displays, custom models and creative prints in skin tones
01 GET TO KNOW
Refill PLA Skin
Refill PLA Skin combines easy PLA printing, natural-looking skin tones and less plastic waste. Its refill format reduces disposable spool waste while keeping the same reliable performance and warm, carefully selected shades.
Beginner-friendly and suitable for most standard FDM printers, it is ideal for figures, busts, character models, cosplay props, anatomy models and artistic projects.
02 HELPFUL REMINDERS
Tips & tricks
1. Dry thoroughly before printing
Dry at 45 °C for 4 h, then store sealed or print from dry storage.
2. Keep PLA out of hot chambers
Use an open printer or avoid extra chamber heat; heated chambers can cause heat creep.
3. Clean build surface before fast prints
Finger oils can lift corners once speeds rise; clean PEI/glass before important parts.
4. Use practical first-layer speed
Start first layers around 60 mm/s, then increase speed after adhesion is stable.
5. Use normal room ventilation
Ventilate long prints and print rooms even with low-odor PLA.
6. Recommended print speed
Use ≤ 300 mm/s for normal prints; Max Printing Speed is the tested ceiling.
03 HOW TO PRINT
Recommendations
MAX
PRINTING SPEED
≤ 890 mm/s
NOZZLE
TEMPERATURE
220 °C
BED
TEMPERATURE
50 °C
CHAMBER
TEMPERATURE
35 °C
HEAT DEFLECTION TEMPERATURE
55 °C
RETRACTION
LENGTH
0.8 mm
04 MATERIAL DATA
Technical Specifications
Filament
|
MAX FLOW RATE |
66 mm³/s |
|
DRYING TEMPERATURE |
45 °C |
|
DRYING TIME |
4 h |
|
VICAT SOFTENING TEMPERATURE |
60 °C |
|
ENCLOSED PRINTER |
Not recommended |
