Lubricants – Λιπαντικά – theMlab https://themlab.gr 3D Printing Lab Sun, 07 Dec 2025 09:25:38 +0000 el hourly 1 https://wordpress.org/?v=6.8.5 https://themlab.gr/wp-content/uploads/2022/01/cropped-Nozzle-32x32.jpg Lubricants – Λιπαντικά – theMlab https://themlab.gr 32 32 3DLAC 80ML ADHESIVE STICK FOR 3D PRINTING https://themlab.gr/product/sp0172/ Sat, 06 Apr 2024 10:55:21 +0000 https://themlab.gr/?post_type=product&p=1925536 3DLAC Adhesive stick for 3D Printing

 

Application

3DLAC STICK can be applied on multiple surfaces on which you want to print with 3D printers. Depending on each material, different adherences will be achieved, so we advise you to do previous tests before printing with certain technical materials. When removing the parts take special care, we recommend waiting until the temperature of the base is below 30 ° C and in case you do not remove the piece, let it cool in the refrigerator and the piece will be released only with a light touch.

Directions for use

  • Shake the product before use.
  • Over a clean and dry surface, place the container upside down and gently press the applicator against the hot bed for a few seconds and allow a small portion of the product to flow.
  • Spread a thin and uniform layer over the printing area for best results.
  • Let the product dry and start printing.
  • To remove the part, wait for the printing base to cool and remove.

Recommendations

Store in a cool dry place away from direct sunlight. After each use keep the cap on.

]]> SUPER LUBE® SUPER CLEAN (NSF A1 CLEANER) https://themlab.gr/product/sp0170/ Sat, 06 Apr 2024 10:23:51 +0000 https://themlab.gr/?post_type=product&p=1925527 Super Lube® Super Kleen Cleaner/Degreaser is a specially formulated, industrial strength, multi-purpose non-solvent solution designed for cleaning dirt, grease, grime and ink on virtually any water safe surface.
Super Lube® Super Kleen Cleaner/Degreaser works effortlessly. Use full strength or dilute as required.
Super Lube® Super Kleen is an NSF registered Food Grade cleaner, rated A1 for use as a general cleaner on all surfaces in and around food processing areas, where its use is not intended for direct food contact.

]]> 7ML SUPER LUBE® MULTI-USE SYNTHETIC OIL WITH SYNCOLON® (PTFE) https://themlab.gr/product/sp0169/ Sat, 06 Apr 2024 10:08:42 +0000 https://themlab.gr/?post_type=product&p=1925525 Super Lube® Multi-Use Synthetic Oil is a premium, synthetic oil with suspended Syncolon® (PTFE) particles that bond to surfaces of moving parts providing protection against friction, wear, rust and corrosion. It is ideally suited for industrial machinery and equipment. Machinery lasts longer, downtime is reduced, and productivity is increased. It is an ISO Grade 100 oil and has a temperature range of -45°F to 450°F (-43°C to 232°C).

Super Lube® Multi-Use Synthetic Oil is dielectric, food grade, clean and environmentally friendly. It is safe on metal, wood, leather, fabric, painted surfaces, most plastics and rubbers.

Perfect to use on all rods on your 3D Printer. For threaded rods, use the grease.

]]> 12G SUPER LUBE® MULTI-PURPOSE SYNTHETIC GREASE WITH SYNCOLON® (PTFE) https://themlab.gr/product/sp0168/ Sat, 06 Apr 2024 09:44:08 +0000 https://themlab.gr/?post_type=product&p=1925522 Super Lube® Grease is a patented synthetic NLGI Grade 2, heavy-duty, multi-purpose lubricant with Syncolon® (PTFE). Synthetic base fluids and the addition of Syncolon® (PTFE) micro powders combine to form a premium lubricant that provides longer life protection against friction, wear, rust and corrosion over a temperature range of -45°F to 450°F (-43°C to 232°C). Machinery lasts longer, downtime is reduced and productivity is increased.

Super Lube® Multi-Purpose Synthetic Grease is dielectric, food grade, clean and environmentally friendly. It offers good mechanical stability, does not evaporate or form gummy deposits. It will not melt or separate.

Perfect to use for threaded rods on 3D Printer.  For non-threaded rods, use the oil.

]]>