Wood – theMlab https://themlab.gr 3D Printing Lab Thu, 07 May 2026 11:05:39 +0000 el hourly 1 https://wordpress.org/?v=6.8.5 https://themlab.gr/wp-content/uploads/2022/01/cropped-Nozzle-32x32.jpg Wood – theMlab https://themlab.gr 32 32 Creality CR-Wood PLA White Pine 1kg (3301130001) https://themlab.gr/product/fwd-cr0001/ Fri, 24 Oct 2025 13:18:59 +0000 https://themlab.gr/?post_type=product&p=1926888

]]>

]]> AzureFilm Refill PLA 1.75mm Wood Black Ebony 750gr https://themlab.gr/product/fpl-wa0007/ Tue, 12 Aug 2025 13:51:59 +0000 https://themlab.gr/?post_type=product&p=1926518 Refill LumberLay

Meet our Refill LumberLay filaments – a unique material that has the look and feel of real wood.

Refill LumberLay filaments were designed to be used with a Master Spool to help reduce waste and improve sustainable 3D printing practices. Moreover, they combine 40% of recycled wood and 60% of PLA filament. Because of this mix, your prints will have the appearance of natural wood, and the physical properties of the product will be extremely similar to natural wood.

Our Refills can also be used with Bambu Lab Reusable Spool.

Please note: The LumberLay filaments must be dried before use (8 hours at 55°C) and are not compatible with a 0.2 mm nozzle.

LumberLay BLOG cover

Printing recommendations:

  • The filament must be dried before use (8 hours at 55°C).
  • LumberLay filaments are not compatible with a 0.2 mm nozzle.
  • For the best results, print at 200–230°C.
  • Recommended printing table temperature is 60°C.
  • Use a glass bed, PEI sheet, Kapton, or Blue tape for the build platform with 3Dlac spray.

*Ideal temperature may vary when using different printers.

P1388921

Why choose AzureFilm Refill filaments?

  • We removed the plastic zip ties and replaced them with a better option to make unpacking easier.
  • The filament tail is now completely straight. That prevents it from getting stuck in the spool and ruining your print when the filament runs out.
  • Perfect compatibility with AzureFilm and Bambu Lab spools.

P1388736 1

Our Refill PLA Lumberlay filaments are perfectly compatible with the AzureFilm Master Spool – the only spool you’ll ever need. By using this reusable spool, you can join us in reducing waste and minimising environmental impact.

AzureFilm Master Spool is our reusable spool, which provides a sustainable and cost-effective solution for 3D printing. The spool is a set of two reusable, injection-molded discs. This ensures the high durability and precision of the spool.

By purchasing and reusing our Master Spool you contribute to a cleaner environment while enjoying a reliable and easy-to-use product, compatible with most 3D printers.

Our Refills can also be used with Bambu Lab Reusable Spool.

 

Features and properties

Feature Value
 Flexibility Low
 Strength Medium
 Durability Medium
 Difficulty to use Low
 Shrinkage / Warping Minimal
 Soluble No
 Diameter available 1.75mm
 Manufacturer AzureFilm

To know more about Lumberlay filaments, read our blog.

You can access the Technical Data Sheet here.

3 9

6 8

9 8

10 8

1 4

5 9

4 9

2 4
]]> AzureFilm Refill PLA 1.75mm White Wood 750gr https://themlab.gr/product/fpl-wa0006/ Tue, 12 Aug 2025 13:47:46 +0000 https://themlab.gr/?post_type=product&p=1926515 Refill LumberLay

Meet our Refill LumberLay filaments – a unique material that has the look and feel of real wood.

Refill LumberLay filaments were designed to be used with a Master Spool to help reduce waste and improve sustainable 3D printing practices. Moreover, they combine 40% of recycled wood and 60% of PLA filament. Because of this mix, your prints will have the appearance of natural wood, and the physical properties of the product will be extremely similar to natural wood.

Our Refills can also be used with Bambu Lab Reusable Spool.

Please note: The LumberLay filaments must be dried before use (8 hours at 55°C) and are not compatible with a 0.2 mm nozzle.

LumberLay BLOG cover

Printing recommendations:

  • The filament must be dried before use (8 hours at 55°C).
  • LumberLay filaments are not compatible with a 0.2 mm nozzle.
  • For the best results, print at 200–230°C.
  • Recommended printing table temperature is 60°C.
  • Use a glass bed, PEI sheet, Kapton, or Blue tape for the build platform with 3Dlac spray.

*Ideal temperature may vary when using different printers.

P1388921

Why choose AzureFilm Refill filaments?

  • We removed the plastic zip ties and replaced them with a better option to make unpacking easier.
  • The filament tail is now completely straight. That prevents it from getting stuck in the spool and ruining your print when the filament runs out.
  • Perfect compatibility with AzureFilm and Bambu Lab spools.

P1388736 1

Our Refill PLA Lumberlay filaments are perfectly compatible with the AzureFilm Master Spool – the only spool you’ll ever need. By using this reusable spool, you can join us in reducing waste and minimising environmental impact.

AzureFilm Master Spool is our reusable spool, which provides a sustainable and cost-effective solution for 3D printing. The spool is a set of two reusable, injection-molded discs. This ensures the high durability and precision of the spool.

By purchasing and reusing our Master Spool you contribute to a cleaner environment while enjoying a reliable and easy-to-use product, compatible with most 3D printers.

Our Refills can also be used with Bambu Lab Reusable Spool.

 

Features and properties

Feature Value
 Flexibility Low
 Strength Medium
 Durability Medium
 Difficulty to use Low
 Shrinkage / Warping Minimal
 Soluble No
 Diameter available 1.75mm
 Manufacturer AzureFilm

To know more about Lumberlay filaments, read our blog.

You can access the Technical Data Sheet here.

3 9

6 8

9 8

10 8

1 4

5 9

4 9

2 4
]]> AzureFilm Refill PLA 1.75mm Grey Oak 750gr https://themlab.gr/product/fpl-wa0005/ Tue, 12 Aug 2025 13:44:36 +0000 https://themlab.gr/?post_type=product&p=1926512 Refill LumberLay

Meet our Refill LumberLay filaments – a unique material that has the look and feel of real wood.

Refill LumberLay filaments were designed to be used with a Master Spool to help reduce waste and improve sustainable 3D printing practices. Moreover, they combine 40% of recycled wood and 60% of PLA filament. Because of this mix, your prints will have the appearance of natural wood, and the physical properties of the product will be extremely similar to natural wood.

Our Refills can also be used with Bambu Lab Reusable Spool.

Please note: The LumberLay filaments must be dried before use (8 hours at 55°C) and are not compatible with a 0.2 mm nozzle.

LumberLay BLOG cover

Printing recommendations:

  • The filament must be dried before use (8 hours at 55°C).
  • LumberLay filaments are not compatible with a 0.2 mm nozzle.
  • For the best results, print at 200–230°C.
  • Recommended printing table temperature is 60°C.
  • Use a glass bed, PEI sheet, Kapton, or Blue tape for the build platform with 3Dlac spray.

*Ideal temperature may vary when using different printers.

P1388921

Why choose AzureFilm Refill filaments?

  • We removed the plastic zip ties and replaced them with a better option to make unpacking easier.
  • The filament tail is now completely straight. That prevents it from getting stuck in the spool and ruining your print when the filament runs out.
  • Perfect compatibility with AzureFilm and Bambu Lab spools.

P1388736 1

Our Refill PLA Lumberlay filaments are perfectly compatible with the AzureFilm Master Spool – the only spool you’ll ever need. By using this reusable spool, you can join us in reducing waste and minimising environmental impact.

AzureFilm Master Spool is our reusable spool, which provides a sustainable and cost-effective solution for 3D printing. The spool is a set of two reusable, injection-molded discs. This ensures the high durability and precision of the spool.

By purchasing and reusing our Master Spool you contribute to a cleaner environment while enjoying a reliable and easy-to-use product, compatible with most 3D printers.

Our Refills can also be used with Bambu Lab Reusable Spool.

 

Features and properties

Feature Value
 Flexibility Low
 Strength Medium
 Durability Medium
 Difficulty to use Low
 Shrinkage / Warping Minimal
 Soluble No
 Diameter available 1.75mm
 Manufacturer AzureFilm

To know more about Lumberlay filaments, read our blog.

You can access the Technical Data Sheet here.

3 9

6 8

9 8

10 8

1 4

5 9

4 9

2 4
]]> AzureFilm Refill PLA 1.75mm Wood Cork 750gr https://themlab.gr/product/fpl-wa0004/ Tue, 12 Aug 2025 13:40:05 +0000 https://themlab.gr/?post_type=product&p=1926508 Refill LumberLay

Meet our Refill LumberLay filaments – a unique material that has the look and feel of real wood.

Refill LumberLay filaments were designed to be used with a Master Spool to help reduce waste and improve sustainable 3D printing practices. Moreover, they combine 40% of recycled wood and 60% of PLA filament. Because of this mix, your prints will have the appearance of natural wood, and the physical properties of the product will be extremely similar to natural wood.

Our Refills can also be used with Bambu Lab Reusable Spool.

Please note: The LumberLay filaments must be dried before use (8 hours at 55°C) and are not compatible with a 0.2 mm nozzle.

LumberLay BLOG cover

Printing recommendations:

  • The filament must be dried before use (8 hours at 55°C).
  • LumberLay filaments are not compatible with a 0.2 mm nozzle.
  • For the best results, print at 200–230°C.
  • Recommended printing table temperature is 60°C.
  • Use a glass bed, PEI sheet, Kapton, or Blue tape for the build platform with 3Dlac spray.

*Ideal temperature may vary when using different printers.

P1388921

Why choose AzureFilm Refill filaments?

  • We removed the plastic zip ties and replaced them with a better option to make unpacking easier.
  • The filament tail is now completely straight. That prevents it from getting stuck in the spool and ruining your print when the filament runs out.
  • Perfect compatibility with AzureFilm and Bambu Lab spools.

P1388736 1

Our Refill PLA Lumberlay filaments are perfectly compatible with the AzureFilm Master Spool – the only spool you’ll ever need. By using this reusable spool, you can join us in reducing waste and minimising environmental impact.

AzureFilm Master Spool is our reusable spool, which provides a sustainable and cost-effective solution for 3D printing. The spool is a set of two reusable, injection-molded discs. This ensures the high durability and precision of the spool.

By purchasing and reusing our Master Spool you contribute to a cleaner environment while enjoying a reliable and easy-to-use product, compatible with most 3D printers.

Our Refills can also be used with Bambu Lab Reusable Spool.

 

Features and properties

Feature Value
 Flexibility Low
 Strength Medium
 Durability Medium
 Difficulty to use Low
 Shrinkage / Warping Minimal
 Soluble No
 Diameter available 1.75mm
 Manufacturer AzureFilm

To know more about Lumberlay filaments, read our blog.

You can access the Technical Data Sheet here.

3 9

6 8

9 8

10 8

1 4

5 9

4 9

2 4
]]> AzureFilm Refill PLA 1.75mm Wood Bamboo 750gr https://themlab.gr/product/fpl-wa0003/ Tue, 12 Aug 2025 13:36:38 +0000 https://themlab.gr/?post_type=product&p=1926506 Refill LumberLay

Meet our Refill LumberLay filaments – a unique material that has the look and feel of real wood.

Refill LumberLay filaments were designed to be used with a Master Spool to help reduce waste and improve sustainable 3D printing practices. Moreover, they combine 40% of recycled wood and 60% of PLA filament. Because of this mix, your prints will have the appearance of natural wood, and the physical properties of the product will be extremely similar to natural wood.

Our Refills can also be used with Bambu Lab Reusable Spool.

Please note: The LumberLay filaments must be dried before use (8 hours at 55°C) and are not compatible with a 0.2 mm nozzle.

LumberLay BLOG cover

Printing recommendations:

  • The filament must be dried before use (8 hours at 55°C).
  • LumberLay filaments are not compatible with a 0.2 mm nozzle.
  • For the best results, print at 200–230°C.
  • Recommended printing table temperature is 60°C.
  • Use a glass bed, PEI sheet, Kapton, or Blue tape for the build platform with 3Dlac spray.

*Ideal temperature may vary when using different printers.

P1388921

Why choose AzureFilm Refill filaments?

  • We removed the plastic zip ties and replaced them with a better option to make unpacking easier.
  • The filament tail is now completely straight. That prevents it from getting stuck in the spool and ruining your print when the filament runs out.
  • Perfect compatibility with AzureFilm and Bambu Lab spools.

P1388736 1

Our Refill PLA Lumberlay filaments are perfectly compatible with the AzureFilm Master Spool – the only spool you’ll ever need. By using this reusable spool, you can join us in reducing waste and minimising environmental impact.

AzureFilm Master Spool is our reusable spool, which provides a sustainable and cost-effective solution for 3D printing. The spool is a set of two reusable, injection-molded discs. This ensures the high durability and precision of the spool.

By purchasing and reusing our Master Spool you contribute to a cleaner environment while enjoying a reliable and easy-to-use product, compatible with most 3D printers.

Our Refills can also be used with Bambu Lab Reusable Spool.

 

Features and properties

Feature Value
 Flexibility Low
 Strength Medium
 Durability Medium
 Difficulty to use Low
 Shrinkage / Warping Minimal
 Soluble No
 Diameter available 1.75mm
 Manufacturer AzureFilm

To know more about Lumberlay filaments, read our blog.

You can access the Technical Data Sheet here.

3 9

6 8

9 8

10 8

1 4

5 9

4 9

2 4
]]> AzureFilm Refill PLA 1.75mm Wood Pine 750gr https://themlab.gr/product/fpl-wa0002/ Tue, 12 Aug 2025 13:23:05 +0000 https://themlab.gr/?post_type=product&p=1926500 Refill LumberLay

Meet our Refill LumberLay filaments – a unique material that has the look and feel of real wood.

Refill LumberLay filaments were designed to be used with a Master Spool to help reduce waste and improve sustainable 3D printing practices. Moreover, they combine 40% of recycled wood and 60% of PLA filament. Because of this mix, your prints will have the appearance of natural wood, and the physical properties of the product will be extremely similar to natural wood.

Our Refills can also be used with Bambu Lab Reusable Spool.

Please note: The LumberLay filaments must be dried before use (8 hours at 55°C) and are not compatible with a 0.2 mm nozzle.

LumberLay BLOG cover

Printing recommendations:

  • The filament must be dried before use (8 hours at 55°C).
  • LumberLay filaments are not compatible with a 0.2 mm nozzle.
  • For the best results, print at 200–230°C.
  • Recommended printing table temperature is 60°C.
  • Use a glass bed, PEI sheet, Kapton, or Blue tape for the build platform with 3Dlac spray.

*Ideal temperature may vary when using different printers.

P1388921

Why choose AzureFilm Refill filaments?

  • We removed the plastic zip ties and replaced them with a better option to make unpacking easier.
  • The filament tail is now completely straight. That prevents it from getting stuck in the spool and ruining your print when the filament runs out.
  • Perfect compatibility with AzureFilm and Bambu Lab spools.

P1388736 1

Our Refill PLA Lumberlay filaments are perfectly compatible with the AzureFilm Master Spool – the only spool you’ll ever need. By using this reusable spool, you can join us in reducing waste and minimising environmental impact.

AzureFilm Master Spool is our reusable spool, which provides a sustainable and cost-effective solution for 3D printing. The spool is a set of two reusable, injection-molded discs. This ensures the high durability and precision of the spool.

By purchasing and reusing our Master Spool you contribute to a cleaner environment while enjoying a reliable and easy-to-use product, compatible with most 3D printers.

Our Refills can also be used with Bambu Lab Reusable Spool.

 

Features and properties

Feature Value
 Flexibility Low
 Strength Medium
 Durability Medium
 Difficulty to use Low
 Shrinkage / Warping Minimal
 Soluble No
 Diameter available 1.75mm
 Manufacturer AzureFilm

To know more about Lumberlay filaments, read our blog.

You can access the Technical Data Sheet here.

3 9

6 8

9 8

10 8

1 4

5 9

4 9

2 4
]]>