CREALITY CR-PLA FILAMENT

High quality PLA filament from the leading 3D-Printer manufacturer in the world.

Nice colors and good quality control – with this filament you will be happy printing all day long!

Printing Recommendations:
Nozzle temperature: 220–240°C
Heated bed: Recommended 60-80°C
Print speed: 50–100 mm/s
Build platform: Glass bed, Kaptontape, Blue tape.

Access to all technical data sheets can be found here.

Due to its exceptional appearance, Silk filament is currently the best-selling product among 3D filaments for 3D printing. When printing with Silk filament, you can expect a shiny and silky finish on the final product, which is not only aesthetically appealing but also successfully conceals the transitions between layers.

Silk filament for 3D printing is a versatile, easy-to-use material and is usually used in 3D printing. Silk Filament is a special mix of material with certain additives, and can be 3D printed in much the same way as normal PETG.
For good results, it is necessary to print at a temperature of 220-240°C and the printing table should be heated to 80°C. Please note that the temperature range of the print media may slightly differ depending on the use of other printers.

Our Silk filament for printers is specially designed to make it easy to use for all beginners and novices. It is accessible, easy to use and a good material because it has excellent properties and it does not shrink when printing.
In addition, it fits nicely to the printing table. Silk filament is a material that is distinguished by an amazing gloss finish, and therefore it is also used for the printing of decorative elements.

Our Silk filament is compatible with almost all 3D printers, including RepRap and MakerBot printers, Ultimaker, Bits from Bytes, Airwolf3D, Makergear, Printrbot, Bukobot, Type A Machines and many more.

AzureFilm Silk filament with a net weight of 1 kg (2.2 lbs) or 0.5 kg (1.10 lbs), in rolls of 210 mm of external diameter, with an inside opening of 60 mm and a width of 62 mm. The filament is vacuum-sealed and contains a bag that absorbs moisture and allows the filament to remain fresh. The thickness of the Silk filament is 1.75 mm.

Refill PLA Silk

Refill PLA Silk filaments offer the exact same properties as our PLA Silk. They give your prints the appearance of a shiny, slightly translucent and silky surface. Moreover, this material helps conceal the transitions between layers when printing.

Refill PLA Silk is easy to print and available in many different colour options. These filaments are an eco-friendly choice that offers reliable performance and consistent results. Furthermore, our Refill PLA Silk filaments are great for beginners.

What is new?

• We removed the plastic zip ties and replaced them with a better option to make unpacking easier.
• The filament tail is now completely straight. That prevents it from getting stuck in the spool and ruining your print when the filament runs out.
• Perfect compatibility with AzureFilm and Bambu Lab spools.

Printing recommendations:

• For the best results, print at 220–240°C.
• Recommended printing table temperature is 80°C.
• Use a glass bed, PEI sheet, Kapton, or Blue tape for the build platform with 3Dlac spray.

*Ideal temperature may vary when using different printers.

Our Refill PLA Silk filaments are perfectly compatible with the AzureFilm Master Spool – the only spool you’ll ever need. By using this reusable spool, you can join us in reducing waste and minimising environmental impact.

AzureFilm Master Spool is our reusable spool, which provides a sustainable and cost-effective solution for 3D printing. The spool is a set of two reusable, injection-molded discs. This ensures the high durability and precision of the spool.

By purchasing and reusing our Master Spool you contribute to a cleaner environment while enjoying a reliable and easy-to-use product, compatible with most 3D printers.

Features & Properties

To know more about PLA filaments, read our blog.

You can access the Technical Data Sheet here.

Refill PLA Silk

Refill PLA Silk filaments offer the exact same properties as our PLA Silk. They give your prints the appearance of a shiny, slightly translucent and silky surface. Moreover, this material helps conceal the transitions between layers when printing.

Refill PLA Silk is easy to print and available in many different colour options. These filaments are an eco-friendly choice that offers reliable performance and consistent results. Furthermore, our Refill PLA Silk filaments are great for beginners.

What is new?

• We removed the plastic zip ties and replaced them with a better option to make unpacking easier.
• The filament tail is now completely straight. That prevents it from getting stuck in the spool and ruining your print when the filament runs out.
• Perfect compatibility with AzureFilm and Bambu Lab spools.

Printing recommendations:

• For the best results, print at 220–240°C.
• Recommended printing table temperature is 80°C.
• Use a glass bed, PEI sheet, Kapton, or Blue tape for the build platform with 3Dlac spray.

*Ideal temperature may vary when using different printers.

Our Refill PLA Silk filaments are perfectly compatible with the AzureFilm Master Spool – the only spool you’ll ever need. By using this reusable spool, you can join us in reducing waste and minimising environmental impact.

AzureFilm Master Spool is our reusable spool, which provides a sustainable and cost-effective solution for 3D printing. The spool is a set of two reusable, injection-molded discs. This ensures the high durability and precision of the spool.

By purchasing and reusing our Master Spool you contribute to a cleaner environment while enjoying a reliable and easy-to-use product, compatible with most 3D printers.

Features & Properties

To know more about PLA filaments, read our blog.

You can access the Technical Data Sheet here.

Refill PLA Silk

Refill PLA Silk filaments offer the exact same properties as our PLA Silk. They give your prints the appearance of a shiny, slightly translucent and silky surface. Moreover, this material helps conceal the transitions between layers when printing.

Refill PLA Silk is easy to print and available in many different colour options. These filaments are an eco-friendly choice that offers reliable performance and consistent results. Furthermore, our Refill PLA Silk filaments are great for beginners.

What is new?

• We removed the plastic zip ties and replaced them with a better option to make unpacking easier.
• The filament tail is now completely straight. That prevents it from getting stuck in the spool and ruining your print when the filament runs out.
• Perfect compatibility with AzureFilm and Bambu Lab spools.

Printing recommendations:

• For the best results, print at 220–240°C.
• Recommended printing table temperature is 80°C.
• Use a glass bed, PEI sheet, Kapton, or Blue tape for the build platform with 3Dlac spray.

*Ideal temperature may vary when using different printers.

Our Refill PLA Silk filaments are perfectly compatible with the AzureFilm Master Spool – the only spool you’ll ever need. By using this reusable spool, you can join us in reducing waste and minimising environmental impact.

AzureFilm Master Spool is our reusable spool, which provides a sustainable and cost-effective solution for 3D printing. The spool is a set of two reusable, injection-molded discs. This ensures the high durability and precision of the spool.

By purchasing and reusing our Master Spool you contribute to a cleaner environment while enjoying a reliable and easy-to-use product, compatible with most 3D printers.

Features & Properties

To know more about PLA filaments, read our blog.

You can access the Technical Data Sheet here.

High Glossy and Silk Texture

Silk-like and high gloss appearance attract eye-popping attention, stand out from filaments and models.

Smooth and Delicate Silky Touch

Get the pearlescent & gorgeous printing surface without polishing, smoothy model surface with the pearly and unique touch.

Neat Winding, Smooth Feeding

Neat winding without tangle and the material is fed smoothly during printing.

Toughness Upgraded without Breakage

Professionally designed formula to improve the gloss and enhance the toughness of the filament.

Highlights

• Shiny Silk PLA
• Stable Dimensional Tolerance
• Tangle Free & No Plugging
• Wide Application
• Good Printability

eSun ePLA-Silk

Shiny surface with silk luster, giving smooth, pearly and unique touch. No extra polishing needed, printing at a high detail results in a beautiful finish. Unique silky smooth appearance gives out shiny eye-popping glossy prints,

Stable Dimensional ToleranceStable Dimensional Tolerance

Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, no cracking, easy handling, resulting in an outstanding surface finish and are highly precise.

Tangle Free & No Plugging

1KG filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder, high successful printing rate.

Wide Application

Silk PLA adds shiny and smooth effect based on ordinary PLA, which is perfect for arts & crafts projects, vases and any other 3D printed items that could benefit from a outstanding shiny appearance.

Good Printability

Support structure is easy to peel off, smooth and flat printed surface; High toughness, not easy to break; Keep all the advantages of PLA, easy to print, low shrinkage, no deformation; Printing speed is faster than ABS, PC, PA and other material.

Printing Recommendations:
Nozzle temperature: 220-240°C
Heated bed: Recommended 60-80°C
Print speed: Above 50 mm/s
Build platform: Glass bed, PEI Sheet, Kaptontape, Blue tape

Access to all technical data sheets can be found here.

This filament combines a range of different pastel colours and creates brilliant rainbow effects in your 3D prints. Rainbow Candy consists of purple, pink, orange and gold. The colours blend seamlessly together for that perfect candy rainbow.

The colours change every 40-45 metres of filament, creating dynamic and ever-changing colour combinations in your 3D projects. Try this filament for cute decorative pieces, accessories or home gadgets and bring rainbows into your home.

Our Silk filaments are made from PLA material and special additives that make the filament have that glossy and silky finish. Consequently, the Silk filament line has very similar technical properties to our PLA filament.

Due to their exceptional appearance, Silk filaments are currently one of the best-selling 3D filaments for 3D printing. Printing with Silk filament is extremely popular, due to its shiny and silky finish on the final 3D product, which is not only aesthetically appealing but also helps conceal the transitions between layers. It is the best choice for 3D printing of decorative elements like vases, figurines, home decor and much more.

For good results, it is necessary to print at a temperature of 220-240°C and the printing table should be heated to 80°C. Please note that the temperature range of the print media may differ slightly depending on the use of other printers.

Our Silk filament for printers is specially designed to make it easy to use for all beginners and 3D makers. It is accessible and user-friendly and what is also very important, is that it does not shrink when 3D printing.

AzureFilms Silk filament is compatible with almost all 3D printers, including Flashforge and MakerBot printers, Ultimaker, Prusa, Bambulab 3D, Creality, Artillery, Makergear, Printrbot, Bukobot, Type A Machines, and many more.

Easy to print,
aesthetically pleasing,
helps to conceal the transitions between layers,
brittle,
lacks mechanical properties.

Strength: High | Flexibility: Low | Durability: Medium

Difficulty to use: Low
Shrinkage/warping: Minimal
Soluble: No
Food safety: Not food safe