Το νήμα Sunlu PLA+ 2.0 είναι ένα ανθεκτικό υλικό 3D εκτύπωσης, σχεδιασμένο για χρήστες που αναζητούν μεγαλύτερη αξιοπιστία, ομαλότερη λειτουργία και εκτυπώσεις υψηλής ποιότητας. Στην έκδοση 2.0, το υλικό προσφέρει έως και 1,5 φορές μεγαλύτερη ρευστότητα σε σχέση με το τυπικό PLA, με αποτέλεσμα την ομαλή τροφοδοσία και μια πιο σταθερή διαδικασία εκτύπωσης. Η διάμετρος 1,75 mm και η ανοχή ±0,02 mm συμβάλλουν στη διατήρηση της ακρίβειας, στη μείωση του κινδύνου προβλημάτων εξώθησης και στην ελαχιστοποίηση της στρέβλωσης. Αποτελεί εξαιρετική επιλογή για όσους επιθυμούν να εκτυπώνουν γρηγορότερα, πιο αποτελεσματικά και χωρίς το πρόβλημα της απόφραξης του ακροφυσίου.

Ανθεκτικότητα που κάνει τη διαφορά

Το Sunlu PLA+ 2.0 συνδυάζει την ευκολία χρήσης που είναι χαρακτηριστική του PLA με ανθεκτικότητα συγκρίσιμη με το Easy ABS, καθιστώντας το ιδανικό για εφαρμογές όπου η αντοχή σε ζημιές και η μεγαλύτερη διάρκεια ζωής της εκτύπωσης είναι απαραίτητες. Το υλικό έχει σχεδιαστεί για να είναι ανθεκτικό στις ρωγμές και πιο ανθεκτικό στην καθημερινή χρήση, επιτρέποντάς σας να δημιουργείτε ανθεκτικά μοντέλα, λειτουργικά εξαρτήματα και έργα που απαιτούν μεγαλύτερη αξιοπιστία. Είναι ένα νήμα που προσφέρει ένα αισθητικό αποτέλεσμα, διασφαλίζοντας παράλληλα ότι το τελικό μοντέλο πληροί υψηλότερες απαιτήσεις.

Γρήγορη ταχύτητα, υψηλή ποιότητα

Αν θέλετε να μειώσετε τους χρόνους παράδοσης των έργων, το Sunlu PLA+ 2.0 σίγουρα θα ικανοποιήσει τις προσδοκίες σας. Το νήμα υποστηρίζει ταχύτητες εκτύπωσης έως 300 mm/s, κάτι που σας επιτρέπει να επιταχύνετε σημαντικά την παραγωγή χωρίς να θυσιάζετε την ποιότητα. Αυτό είναι ιδιαίτερα σημαντικό για μεγαλύτερες παραγγελίες, εντατική εργασία σε εργαστήρια ή όταν οι προθεσμίες είναι κρίσιμες. Η σταθερή τροφοδοσία υλικού, η χαμηλή τάση παραμόρφωσης και οι βελτιωμένες παράμετροι εξασφαλίζουν ότι, ακόμη και σε υψηλές ταχύτητες, μπορείτε να βασιστείτε σε μια ομαλή διαδικασία εκτύπωσης και ικανοποιητικά αποτελέσματα.

Ευρεία συμβατότητα και ευέλικτη εφαρμογή

Το νήμα Sunlu PLA+ 2.0 σχεδιάστηκε με γνώμονα την ευρεία συμβατότητα, γι’ αυτό και λειτουργεί τόσο με συσκευές SUNLU —όπως εκτυπωτές 3D FDM, αξεσουάρ και στεγνωτήρες νήματος— όσο και με σχεδόν όλους τους εκτυπωτές 3D FDM άλλων κατασκευαστών. Αυτό σας επιτρέπει να το ενσωματώσετε εύκολα στην τρέχουσα ροή εργασίας σας και να αξιοποιήσετε αμέσως τις δυνατότητές του. Πρόκειται για ένα ευέλικτο υλικό για όσους αναζητούν ένα ανθεκτικό, ακριβές και γρήγορο νήμα για καθημερινά και πιο απαιτητικά έργα.

Printing Recommendations:
Nozzle temperature: 200-230 °C
Heated bed: Recommended 0–60 °C
Print speed: Above 50 mm/s
Build platform: Glass bed, PEI Sheet, Kaptontape, Blue tape

Access to all technical data sheets can be found here.

PLA is the most popular type of 3D filament, probably because is one of the easiest 3D filaments to print and it doesn’t warp as easily, meaning it doesn’t require a heating bed (although it definitely helps to heat it). Another benefit of using PLA is that it’s considered an odorless filament and is environmentally friendlier than many others 3D printer filaments.

So far it sounds like a perfect 3D filament but just like every other plastic, it has some disadvantages; the PLA material has low-temperature resistance, and it will start to lose mechanical strength at temperatures over 60 °C. It is also important that we mention that this filament is brittle, so avoid making PLA 3D models that might be bent, twisted, or repeatedly dropped. Instead use it to make 3D models like decorations, low-wear toys, prototype parts, and containers.

Even though our PLA filament is made from materials that are food-safe, we do not recommend repeatedly drinking or eating from your 3D prints, because the bacteria can build up there over time.

Our PLA filament is compatible with almost all 3D printers, including Creality and MakerBot printers, Ultimaker, Artillery, Flashforge, Creatbot, Makergear, Bukobot, Type A Machines and many more.

AzureFilm PLA filaments come in different colors and options; from the basics colors like white and black to glow-in-the-dark properties or those mixed with real wood or glitter.

Easy to print

Lot of colours/styles

Biodegradable

Affordable

Brittle

Lacks mechanical properties

Strength: Medium | Flexibility: Low | Durability: Medium | Difficulty to use: Low

Shrinkage/warping: Minimal | Soluble: No

Food safety: Although our PLA is eco-friendly and our masterbatch is made from food-safe materials, we suggest you use our PETG filament for which we have a food safe certification.

Printing Recommendations:
Nozzle temperature: 200-230 °C
Heated bed: Recommended 0–60 °C
Print speed: Above 50 mm/s
Build platform: Glass bed, PEI Sheet, Kaptontape, Blue tape

Access to all technical data sheets can be found here.

PLA is the most popular type of 3D filament, probably because is one of the easiest 3D filaments to print and it doesn’t warp as easily, meaning it doesn’t require a heating bed (although it definitely helps to heat it). Another benefit of using PLA is that it’s considered an odorless filament and is environmentally friendlier than many others 3D printer filaments.

So far it sounds like a perfect 3D filament but just like every other plastic, it has some disadvantages; the PLA material has low-temperature resistance, and it will start to lose mechanical strength at temperatures over 60 °C. It is also important that we mention that this filament is brittle, so avoid making PLA 3D models that might be bent, twisted, or repeatedly dropped. Instead use it to make 3D models like decorations, low-wear toys, prototype parts, and containers.

Even though our PLA filament is made from materials that are food-safe, we do not recommend repeatedly drinking or eating from your 3D prints, because the bacteria can build up there over time.

Our PLA filament is compatible with almost all 3D printers, including Creality and MakerBot printers, Ultimaker, Artillery, Flashforge, Creatbot, Makergear, Bukobot, Type A Machines and many more.

AzureFilm PLA filaments come in different colors and options; from the basics colors like white and black to glow-in-the-dark properties or those mixed with real wood or glitter.

Easy to print

Lot of colours/styles

Biodegradable

Affordable

Brittle

Lacks mechanical properties

Strength: Medium | Flexibility: Low | Durability: Medium | Difficulty to use: Low

Shrinkage/warping: Minimal | Soluble: No

Food safety: Although our PLA is eco-friendly and our masterbatch is made from food-safe materials, we suggest you use our PETG filament for which we have a food safe certification.

Eco-friendly, odorless and non-toxic

PETG has excellent wether resistance and chemical resistance, no odor and non-toxic, which are friendly to the environment. It can print with fine results.

Excellent stability and moisture resistance

With uniform diameter, it’s not easy to crack and warp.

With good toughness, the printed model is firm and sturdy

The filament can bend repeatedly with high elongation at break.

Transparent and Glossy

The finished product has a fine surface with exquisite details

Simple operation and good compatibility

CR-PETG is compatible with all Creality FDM preinters. High quality filament creates delicate artistic work.

Highlights

• Shiny Silk PLA
• Stable Dimensional Tolerance
• Tangle Free & No Plugging
• Wide Application
• Good Printability

eSun ePLA-Silk

Shiny surface with silk luster, giving smooth, pearly and unique touch. No extra polishing needed, printing at a high detail results in a beautiful finish. Unique silky smooth appearance gives out shiny eye-popping glossy prints,

Stable Dimensional ToleranceStable Dimensional Tolerance

Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, no bubbles, no cracking, easy handling, resulting in an outstanding surface finish and are highly precise.

Tangle Free & No Plugging

1KG filament reel, perfect roundness and very tight diameter tolerance, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder, high successful printing rate.

Wide Application

Silk PLA adds shiny and smooth effect based on ordinary PLA, which is perfect for arts & crafts projects, vases and any other 3D printed items that could benefit from a outstanding shiny appearance.

Good Printability

Support structure is easy to peel off, smooth and flat printed surface; High toughness, not easy to break; Keep all the advantages of PLA, easy to print, low shrinkage, no deformation; Printing speed is faster than ABS, PC, PA and other material.

Printing Recommendations:
Nozzle temperature: 200–230°C
Heated bed: Not required (recommended 50–60°C)
Print speed:50–100 mm/s
Build platform: Glass bed, Kaptontape, Blue tape.

Access to all technical data sheets can be found here.

AzureFilm PLA filament with a net weight of 1 kg (2.2 lbs) or 0.5 kg (1.10 lbs), in rolls of 210 mm of external diameter, with an inside opening of 60 mm and a width of 62 mm. The filament is vacuum-sealed and contains a bag that absorbs moisture and allows the filament to remain fresh. The thickness of the PLA filament is 1.75 mm or 2.85 mm and it is produced in more than 30 different shades.

PLA (polylactic acid) filament for 3d printing is a versatile, easy-to-use material and is usually used in 3D printing. PLA filament is bio-plastic, which means that it is a renewable and biodegradable material. As a biodegradable material, it is much better for the environment, especially in comparison with petrochemical alternatives (eg. ABS). For good results, it is necessary to print at a temperature of 200–230°C and the printing table should be heated to 50-60°C. Please note that the temperature range of the print media may slightly differ depending on the use of other printers.

Our PLA filament for printers is specially designed to make it easy to use for all beginners and novices. We recommend that a newcomer keeps using the PLA printing filament because it is truly the most accessible and easy to use. It is a good material because it has excellent properties and it does not shrink when printing. In addition, it fits nicely to the printing table. ABS filament is a great alternative, but it does shrink, so you’ll have more problems with the grip of the filament on the printing table. PLA filament is a material that is distinguished by a gloss finish, and therefore it is also used for the printing of decorative elements.

Our PLA filament is compatible with almost all 3D printers, including RepRap and MakerBot printers, Ultimaker, Bits from Bytes, Airwolf3D, Makergear, Printrbot, Bukobot, Type A Machines and many more.

PLA 3d printing filament is the best-selling product out of the 3D filaments used for 3D printing with a good reason, since it is used in a wide range of 3D printing. Its advantages are that it is odorless, easy to print and does not require a heated table when printing. For PETG Filaments click here.

Printing Recommendations:
Nozzle temperature: 220–240°C
Heated bed: Recommended 60-80°C
Print speed: 50–100 mm/s
Build platform: Glass bed, Kaptontape, Blue tape.

Access to all technical data sheets can be found here.

Due to its exceptional appearance, Silk filament is currently the best-selling product among 3D filaments for 3D printing. When printing with Silk filament, you can expect a shiny and silky finish on the final product, which is not only aesthetically appealing but also successfully conceals the transitions between layers.

Silk filament for 3D printing is a versatile, easy-to-use material and is usually used in 3D printing. Silk Filament is a special mix of material with certain additives, and can be 3D printed in much the same way as normal PETG.
For good results, it is necessary to print at a temperature of 220-240°C and the printing table should be heated to 80°C. Please note that the temperature range of the print media may slightly differ depending on the use of other printers.

Our Silk filament for printers is specially designed to make it easy to use for all beginners and novices. It is accessible, easy to use and a good material because it has excellent properties and it does not shrink when printing.
In addition, it fits nicely to the printing table. Silk filament is a material that is distinguished by an amazing gloss finish, and therefore it is also used for the printing of decorative elements.

Our Silk filament is compatible with almost all 3D printers, including RepRap and MakerBot printers, Ultimaker, Bits from Bytes, Airwolf3D, Makergear, Printrbot, Bukobot, Type A Machines and many more.

AzureFilm Silk filament with a net weight of 1 kg (2.2 lbs) or 0.5 kg (1.10 lbs), in rolls of 210 mm of external diameter, with an inside opening of 60 mm and a width of 62 mm. The filament is vacuum-sealed and contains a bag that absorbs moisture and allows the filament to remain fresh. The thickness of the Silk filament is 1.75 mm.

Printing Recommendations:
Nozzle temperature: 200–230°C
Heated bed: Not required (recommended 50–60°C)
Print speed:50–100 mm/s
Build platform: Glass bed, Kaptontape, Blue tape.

Access to all technical data sheets can be found here.

AzureFilm PLA filament with a net weight of 1 kg (2.2 lbs) or 0.5 kg (1.10 lbs), in rolls of 210 mm of external diameter, with an inside opening of 60 mm and a width of 62 mm. The filament is vacuum-sealed and contains a bag that absorbs moisture and allows the filament to remain fresh. The thickness of the PLA filament is 1.75 mm or 2.85 mm and it is produced in more than 30 different shades.

PLA (polylactic acid) filament for 3d printing is a versatile, easy-to-use material and is usually used in 3D printing. PLA filament is bio-plastic, which means that it is a renewable and biodegradable material. As a biodegradable material, it is much better for the environment, especially in comparison with petrochemical alternatives (eg. ABS). For good results, it is necessary to print at a temperature of 200–230°C and the printing table should be heated to 50-60°C. Please note that the temperature range of the print media may slightly differ depending on the use of other printers.

Our PLA filament for printers is specially designed to make it easy to use for all beginners and novices. We recommend that a newcomer keeps using the PLA printing filament because it is truly the most accessible and easy to use. It is a good material because it has excellent properties and it does not shrink when printing. In addition, it fits nicely to the printing table. ABS filament is a great alternative, but it does shrink, so you’ll have more problems with the grip of the filament on the printing table. PLA filament is a material that is distinguished by a gloss finish, and therefore it is also used for the printing of decorative elements.

Our PLA filament is compatible with almost all 3D printers, including RepRap and MakerBot printers, Ultimaker, Bits from Bytes, Airwolf3D, Makergear, Printrbot, Bukobot, Type A Machines and many more.

PLA 3d printing filament is the best-selling product out of the 3D filaments used for 3D printing with a good reason, since it is used in a wide range of 3D printing. Its advantages are that it is odorless, easy to print and does not require a heated table when printing. For PETG Filaments click here.

Printing Recommendations:
Nozzle temperature: 200–230°C
Heated bed: Not required (recommended 50–60°C)
Print speed:50–100 mm/s
Build platform: Glass bed, Kaptontape, Blue tape.

Access to all technical data sheets can be found here.

AzureFilm PLA filament with a net weight of 1 kg (2.2 lbs) or 0.5 kg (1.10 lbs), in rolls of 210 mm of external diameter, with an inside opening of 60 mm and a width of 62 mm. The filament is vacuum-sealed and contains a bag that absorbs moisture and allows the filament to remain fresh. The thickness of the PLA filament is 1.75 mm or 2.85 mm and it is produced in more than 30 different shades.

PLA (polylactic acid) filament for 3d printing is a versatile, easy-to-use material and is usually used in 3D printing. PLA filament is bio-plastic, which means that it is a renewable and biodegradable material. As a biodegradable material, it is much better for the environment, especially in comparison with petrochemical alternatives (eg. ABS). For good results, it is necessary to print at a temperature of 200–230°C and the printing table should be heated to 50-60°C. Please note that the temperature range of the print media may slightly differ depending on the use of other printers.

Our PLA filament for printers is specially designed to make it easy to use for all beginners and novices. We recommend that a newcomer keeps using the PLA printing filament because it is truly the most accessible and easy to use. It is a good material because it has excellent properties and it does not shrink when printing. In addition, it fits nicely to the printing table. ABS filament is a great alternative, but it does shrink, so you’ll have more problems with the grip of the filament on the printing table. PLA filament is a material that is distinguished by a gloss finish, and therefore it is also used for the printing of decorative elements.

Our PLA filament is compatible with almost all 3D printers, including RepRap and MakerBot printers, Ultimaker, Bits from Bytes, Airwolf3D, Makergear, Printrbot, Bukobot, Type A Machines and many more.

PLA 3d printing filament is the best-selling product out of the 3D filaments used for 3D printing with a good reason, since it is used in a wide range of 3D printing. Its advantages are that it is odorless, easy to print and does not require a heated table when printing. For PETG Filaments click here.