Transparent – theMlab

AzureFilm Refill PLA 1.75mm Transparent 1kg

themlab — Fri, 15 May 2026 11:18:54 +0000

Compatible with AzureFilm Master Spool & Bambu Reusable Spool

Refill PLA

Refill PLA filaments have the exact same properties as our PLA Original. These filaments are an eco-friendly choice that offers reliable performance and consistent results. Furthermore, our Refill PLA filaments are easy to print and great for beginners.

What is new?

We removed the plastic zip ties and replaced them with a better option to make unpacking easier.
The filament tail is now completely straight. That prevents it from getting stuck in the spool and ruining your print when the filament runs out.
Perfect compatibility with AzureFilm and Bambu Lab spools.

Printing recommendations:

Print at 200–230°C temperature for best results.*
You do not need a heated bed however, we recommend preheating your printing table to 50–60°C.
Use a glass bed, PEI sheet, Kapton, or Blue tape for the build platform with 3Dlac spray.

*Ideal temperature may vary when using different printers.

Our Refill PLA filaments are perfectly compatible with the AzureFilm Master Spool – the only spool you’ll ever need. By using this reusable spool, you can join us in reducing waste and minimising environmental impact.

AzureFilm Master Spool is our reusable spool, which provides a sustainable and cost-effective solution for 3D printing. The spool is a set of two reusable, injection-molded discs. This ensures the high durability and precision of the spool.

By purchasing and reusing our Master Spool you contribute to a cleaner environment while enjoying a reliable and easy-to-use product, compatible with most 3D printers.

Features and properties

Feature	Value
Flexibility	Low
Strength	Medium
Durability	Medium
Difficulty to use	Low
Shrinkage / Warping	Minimal
Soluble	No
Diameter available	1.75mm
Manufacturer	AzureFilm

You can access the Technical Data Sheet here.

Creality3D Hyper PETG 1.75mm Transparent 1kg (3301030042)

themlab — Mon, 23 Mar 2026 06:29:35 +0000

Creality3D CR-PETG 1.75mm Διάφανο – Transparent 1kg (3301030037)

themlab — Mon, 28 Apr 2025 11:37:04 +0000

Eco-friendly, odorless and non-toxic

PETG has excellent wether resistance and chemical resistance, no odor and non-toxic, which are friendly to the environment. It can print with fine results.

Excellent stability and moisture resistance

With uniform diameter, it’s not easy to crack and warp.

With good toughness, the printed model is firm and sturdy

The filament can bend repeatedly with high elongation at break.

Transparent and Glossy

The finished product has a fine surface with exquisite details

Simple operation and good compatibility

CR-PETG is compatible with all Creality FDM preinters. High quality filament creates delicate artistic work.

Creality DLP Resin for 3D Printers Transparent 500ml (3302020014)

themlab — Sat, 31 Dec 2022 12:37:28 +0000

DLP Resin for DLP 3D Printers.
DLP Resin is available in 7 colors: White 500ml, Beige 500ml, Black 500ml, Blue 500ml, Red 500ml, Gray 500ml, Green 500ml.

AzureFilm Flexible Filament Soft 85A Transparent 1.75mm 0,65Kg

themlab — Mon, 26 Dec 2022 11:21:44 +0000

TPU filaments are essentially plastics with rubber-like qualities, making them extremely flexible and durable. Flexible filaments are commonly used to produce household appliances, toys, phone cases, wearables like wristbands, automotive parts, and medical supplies. If you need something that is supposed to bend, stretch, or compress, this TPU 3D printer filament should be up for the task.

Compared to generic TPE, AzureFilms TPU filament is slightly more rigid, which is a good feature in the 3D printing industry because it means that is easier to 3D print it. It is also a little more durable and can better retain its elasticity in the cold. The wear resistance of the TPU Filament is 20% better than the ABS Filament and 68% better than the PLA Filament.

AzureFilms TPU is incredibly easy to feed in your 3D printer; we offer 2 different types of hardness 85A shore and 98A shore. If you have a direct drive extruder you can print both types of flexible filaments, but if your 3D printer has a Bowden tube you will need to use a very specific fine-tuning. Printers with a Bowden tube have a tendency to get jammed while printing any TPU filaments. If you have a Bowden tube we suggest you use 98A shore flexible filament (the filament is a little bit harder than 85A shore, which makes it easier to print).

WARNING: If you hear the filament cross during 3D printing it means that the filament is damp and needs to be dried for good results. Use a filament dryer like Creality Dry box.

Pros: Very flexible, perfect for parts that bend or compress, 2 options: 85A shore and 98A shore

Cons: Difficult to print, requires tight filament path and slow print speed, hygroscopic

Strength: Medium | Flexibility: Very High| Durability: Very High

Difficulty to use: Medium | Shrinkage/warping: Minimal

Soluble: No | Food safety: Not food safe

If you want to learn more about printing flexible filaments check out this blog.

Test specimens print settings:

3D printer: Creality Ender 3 Pro + Micro Swiss Direct Drive Ekstruder	Infill: 100 %	Nozzle temperature: 230 °C
Slicer: Cura	Shells: /	Bed temperature: 60 °C
Nozzle: 0,4 mm	Layer height: 0,2 mm	Print speed: 30 mm/s

Printing Recommendations:
Nozzle temperature: 200–240°C
Heated bed: Recommended 0-80°C
Print speed: 10–30 mm/s
Build platform: Glass bed, Kaptontape, Blue tape. Recommended: Glass bed + Dimafix

Access to all technical data sheets can be found here.

Flexible Filament Transparent 1.75mm. The hardness of TPU Filament is 85A Shore. Flex Filament is made in Slovenia and is manufactured in 300g coils. The wear resistance of the TPU Filament is 20% better than the ABS Filament and 68% better than the PLA Filament.

Recommended Print Speed:
Upper and lower layer: 10-20 mm / sec (600-1200 mm / min)
Print speed: 15-35 mm / sec (900-2100 mm / min)

WARNING: If you have trouble printing with flexible filaments, you may hear the filament cross during printing, which means that the filament is damp and needs to be dried for good results.

AzureFilm PETG 1.75mm Transparent 1kg

themlab — Mon, 19 Sep 2022 15:21:30 +0000

Test specimens print settings:
3D printer: Creality Ender 3
Slicer: Cura
Nozzle: 0,4 mm
Infill: 20 %
Shells: 2
Layer height: 0,2 mm
Nozzle temperature: 230 °C
Bed temperature: 80 °C
Print speed: 50 mm/s

Printing Recommendations:
Nozzle temperature: 220–240°C
Heated bed: Recommended 60-80°C
Print speed: 50–100 mm/s
Build platform: Glass bed, Kaptontape, Blue tape.

Access to all technical data sheets can be found here.

PETG Filament 1KG net weight 1 kg (2.2 lbs), in the welding positions on the reel with the outer diameter of 210 mm, with an inside opening of 60 mm diameter and a width of the reel of 62 mm. The filament is vacuum-sealed and contains a bag that absorbs moisture and allows the filament to remain fresh. The thickness of the PETG filament is 1.75 mm or 2.85 mm and is produced in more than 10 different shades.

PETG (polyethylene terephthalate) filament is a plastic thread that combines the properties of the ABS filament (solid, temperature-resistant, extremely durable) and the PLA filament (easy to print). Because of these properties, PETG is a filament material for 3D printing that you must have. It is environmentally friendly and can be recycled after use. Precisely because of its excellent chemical stability, PETG is a material that meets all the requirements of the European Parliament and the Council on artificial substances in contact with food products and medicines.

Our PETG filament is extremely durable, solid and odorless. It is an excellent filament that combines a combination of strength and flexibility, so it is used for printing mechanical products or in robotics. Because it has an extremely minimal degree of shrinkage and bending, it is ideal for printing large products. It is a material that is distinguished by a gloss finish, and therefore it is also used for the printing of decorative elements.
For good results, you must print at a temperature of 220–240°C, and the printing table should be heated to 80-90°C. Please note that the temperature range of the print media may slightly differ depending on the use of other printers.

Plastic thread made of PETG material easily adheres to the printing table so that it can be printed on acrylic, glass or polyamide tape. The advantage of PETG material is that you do not need a sealed printer for printing, and the print speed is comparable to that of PLA filament printing. The PETG material has an excellent support structure due to the strength that helps to ensure that the layers are perfectly adhering during the printing, and consequently the products are structurally strong and resistant to mechanical influences.

AzureFilm PLA 1.75mm Διάφανο – Transparent 1kg

themlab — Thu, 17 Feb 2022 18:46:26 +0000

Test specimens print settings:
3D printer: Creality Ender 3
Slicer: Cura
Nozzle: 0,4 mm
Infill: 20 %
Shells: 2
Layer height: 0,2 mm
Nozzle temperature: 215 °C
Bed temperature: 55 °C
Print speed: 50 mm/s

Printing Recommendations:
Nozzle temperature: 200–230°C
Heated bed: Not required (recommended 50–60°C)
Print speed:50–100 mm/s
Build platform: Glass bed, Kaptontape, Blue tape.

Access to all technical data sheets can be found here.

AzureFilm PLA filament with a net weight of 1 kg (2.2 lbs) or 0.5 kg (1.10 lbs), in rolls of 210 mm of external diameter, with an inside opening of 60 mm and a width of 62 mm. The filament is vacuum-sealed and contains a bag that absorbs moisture and allows the filament to remain fresh. The thickness of the PLA filament is 1.75 mm or 2.85 mm and it is produced in more than 30 different shades.

PLA (polylactic acid) filament for 3d printing is a versatile, easy-to-use material and is usually used in 3D printing. PLA filament is bio-plastic, which means that it is a renewable and biodegradable material. As a biodegradable material, it is much better for the environment, especially in comparison with petrochemical alternatives (eg. ABS). For good results, it is necessary to print at a temperature of 200–230°C and the printing table should be heated to 50-60°C. Please note that the temperature range of the print media may slightly differ depending on the use of other printers.

Our PLA filament for printers is specially designed to make it easy to use for all beginners and novices. We recommend that a newcomer keeps using the PLA printing filament because it is truly the most accessible and easy to use. It is a good material because it has excellent properties and it does not shrink when printing. In addition, it fits nicely to the printing table. ABS filament is a great alternative, but it does shrink, so you’ll have more problems with the grip of the filament on the printing table. PLA filament is a material that is distinguished by a gloss finish, and therefore it is also used for the printing of decorative elements.

Our PLA filament is compatible with almost all 3D printers, including RepRap and MakerBot printers, Ultimaker, Bits from Bytes, Airwolf3D, Makergear, Printrbot, Bukobot, Type A Machines and many more.

PLA 3d printing filament is the best-selling product out of the 3D filaments used for 3D printing with a good reason, since it is used in a wide range of 3D printing. Its advantages are that it is odorless, easy to print and does not require a heated table when printing. For PETG Filaments click here.