Navy Blue – theMlab https://themlab.gr 3D Printing Lab Tue, 07 Jul 2026 15:04:20 +0000 el hourly 1 https://wordpress.org/?v=6.8.8 https://themlab.gr/wp-content/uploads/2022/01/cropped-Nozzle-32x32.jpg Navy Blue – theMlab https://themlab.gr 32 32 AzureFilm Refill PLA 1.75mm Navy Blue 1kg https://themlab.gr/product/fpl-oa0072/ Tue, 02 Jun 2026 11:27:57 +0000 https://themlab.gr/?post_type=product&p=1927300 Compatible with AzureFilm Master Spool & Bambu Reusable Spool

Refill PLA

Refill PLA filaments have the exact same properties as our PLA Original. These filaments are an eco-friendly choice that offers reliable performance and consistent results. Furthermore, our Refill PLA filaments are easy to print and great for beginners.

What is new?

  • We removed the plastic zip ties and replaced them with a better option to make unpacking easier.
  • The filament tail is now completely straight. That prevents it from getting stuck in the spool and ruining your print when the filament runs out.
  • Perfect compatibility with AzureFilm and Bambu Lab spools.

Printing recommendations:

  • Print at 200–230°C temperature for best results.*
  • You do not need a heated bed however, we recommend preheating your printing table to 50–60°C.
  • Use a glass bed, PEI sheet, Kapton, or Blue tape for the build platform with 3Dlac spray.

*Ideal temperature may vary when using different printers.

PLA Skupinske

Our Refill PLA filaments are perfectly compatible with the AzureFilm Master Spool – the only spool you’ll ever need. By using this reusable spool, you can join us in reducing waste and minimising environmental impact.

AzureFilm Master Spool is our reusable spool, which provides a sustainable and cost-effective solution for 3D printing. The spool is a set of two reusable, injection-molded discs. This ensures the high durability and precision of the spool.

By purchasing and reusing our Master Spool you contribute to a cleaner environment while enjoying a reliable and easy-to-use product, compatible with most 3D printers.

 

Features and properties

Feature Value
 Flexibility Low
 Strength Medium
 Durability Medium
 Difficulty to use Low
 Shrinkage / Warping Minimal
 Soluble No
 Diameter available 1.75mm
 Manufacturer AzureFilm

You can access the Technical Data Sheet here.

]]> Creality3D CR PLA Matte Navy Blue 1kg (3301010298) https://themlab.gr/product/fpl-cr0018/ Mon, 23 Mar 2026 07:14:09 +0000 https://themlab.gr/?post_type=product&p=1927135

]]> AzureFilm PLA 1.75mm Navy Blue 1kg https://themlab.gr/product/fpl-oa0032/ Mon, 21 Aug 2023 16:27:22 +0000 https://themlab.gr/?post_type=product&p=1925185 Test specimens print settings:
3D printer: Creality Ender 3
Slicer: Cura
Nozzle: 0,4 mm
Infill: 20 %
Shells: 2
Layer height: 0,2 mm
Nozzle temperature: 230 °C
Bed temperature: 80 °C
Print speed: 50 mm/s

Printing Recommendations:
Nozzle temperature: 220–240°C
Heated bed: Recommended 60-80°C
Print speed: 50–100 mm/s
Build platform: Glass bed, Kaptontape, Blue tape.

Access to all technical data sheets can be found here.

Due to its exceptional appearance, Silk filament is currently the best-selling product among 3D filaments for 3D printing. When printing with Silk filament, you can expect a shiny and silky finish on the final product, which is not only aesthetically appealing but also successfully conceals the transitions between layers.

Silk filament for 3D printing is a versatile, easy-to-use material and is usually used in 3D printing. Silk Filament is a special mix of material with certain additives, and can be 3D printed in much the same way as normal PETG.
For good results, it is necessary to print at a temperature of 220-240°C and the printing table should be heated to 80°C. Please note that the temperature range of the print media may slightly differ depending on the use of other printers.

Our Silk filament for printers is specially designed to make it easy to use for all beginners and novices. It is accessible, easy to use and a good material because it has excellent properties and it does not shrink when printing.
In addition, it fits nicely to the printing table. Silk filament is a material that is distinguished by an amazing gloss finish, and therefore it is also used for the printing of decorative elements.

Our Silk filament is compatible with almost all 3D printers, including RepRap and MakerBot printers, Ultimaker, Bits from Bytes, Airwolf3D, Makergear, Printrbot, Bukobot, Type A Machines and many more.

AzureFilm Silk filament with a net weight of 1 kg (2.2 lbs) or 0.5 kg (1.10 lbs), in rolls of 210 mm of external diameter, with an inside opening of 60 mm and a width of 62 mm. The filament is vacuum-sealed and contains a bag that absorbs moisture and allows the filament to remain fresh. The thickness of the Silk filament is 1.75 mm.

 

]]>