Highlights

• Co-developed by Creality and BASF
• High Quality and Reliable Raw Material
• Neat Winding to avoid Tangles and Jamming
• Thiness While Toughness
• Various Colors, Seal Vacuum Packing

Eco-friendly, odorless and non-toxic

PETG has excellent wether resistance and chemical resistance, no odor and non-toxic, which are friendly to the environment. It can print with fine results.

Excellent stability and moisture resistance

With uniform diameter, it’s not easy to crack and warp.

With good toughness, the printed model is firm and sturdy

The filament can bend repeatedly with high elongation at break.

Transparent and Glossy

The finished product has a fine surface with exquisite details

Simple operation and good compatibility

CR-PETG is compatible with all Creality FDM preinters. High quality filament creates delicate artistic work.

CREALITY CR-PLA FILAMENT

High quality PLA filament from the leading 3D-Printer manufacturer in the world.

Nice colors and good quality control – with this filament you will be happy printing all day long!

PLA+ is an enhanced version of ordinary PLA. It has higher strength and better toughness, not easy to break. low shrinkage, no deformation, no cracking, high printing precision. Made with starch raw materials derived from plant resources, ideal for indoor printing.

Highlights

• Easy to Print
• High Speed Printing
• Tangle Free & No Plugging
• Dimensional Tolerance +/- 0.03mm
• High Compatibility

Easy to Print

PLA+ is an enhanced version of ordinary PLA. It has higher strength and better toughness, not easy to break. low shrinkage, no deformation, no cracking, high printing precision. Made with starch raw materials derived from plant resources, ideal for indoor printing.

High Speed Printing

Meet the demands for high-speed printers. Continues consistently outstanding performance at high speeds. Compatible with Bambu Lab X1 / X1C / P1P ,Creality K1 / K1 Max and AnkerMake M5.

Tangle Free & No Plugging

Total Length: 340-350m. Full 1KG 3D printer filament reel, perfect roundness and very tight diameter tolerance, good winding, does not overlap or tangle. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.

Dimensional Tolerance +/- 0.03mm

eSUN PLA+ 3D printer filaments are produced with more precise specification. Minimum tolerance and low warping to ensure consistent feeding and stable prints, no bubbles, less stringing, extremely high successful rate.

High Compatibility

Compatible with Most of FDM 3D Printers, such as:Bambu Lab P1P / X1 / X1C, AnkerMake M5, Creality K1 / K1 Max, Voron 2.4, FLSUN V400, Prusa, UltiMaker, MK3, Ender 3, MakerBot, Flashforge, Raise3D. Good layer bonding performance meets your demands for printing functional parts with higher toughness. Widly used in machinery, electronic appliances, automobiles, decorations, COSPLAY and other items.

Creality Ender – PLA+ – 1,75mm – 1kg

Features:

• Main material: Resin monomer & Photo initiator
• UV Wavelength 365-410nm
• Bottom exposure time(s) 20-60s, normal exposure time(s) 5-15s

Normal UV Resin

The material is rigid and tough. Strong material in the shovel model can easily lead to the model fragmentation, but too flexible material will be prone to the details of the print tensile deformation or fracture, which will affect the molding accuracy and aesthetics. The resin is stable under different climatic conditions and is also easy to store, overcoming the shortcomings of other resins easily damp softening and environmental corrosion.

Professional LCD molding resin

Optimizing the formation of LCD low light source and printing efficiency is higher than the market compatible DLP / LCD / SLA resin. The resin is only designed for the LCD model of the resin, not recommended DLP or SLA machine. This resin ensures the strength of molded parts and not excessive shrinkage, but also improve print speed, shorten the curing time and enhance the printing efficiency of LCD machines as much as possible.

Strong adhesion and easy to detach

Not only high success rate of printing and precision, but also minimize resin release force and adhesion, so that the model attached to the forming platform can easily shovel and low viscosity makes it easier to clean the machine and model.

Storage method:

• Keep away from light seals at room temperature (sunshine contains a lot of UV light, will solidify photosensitive resin. After testing, the light is not affected if it is not UV light).
• It is recommended to save at 15 ℃ -35 ℃ ambient temperature, the lower the temperature, the higher the viscosity of the resin. Sealed storage, excessive dust or moisture can affect print quality. Sunshine contains a lot of UV light, will solidify photosensitive resin.

Usage:

• 1. Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.
• 2. Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
• 3. Inadvertent contact, as soon as possible to use a lot of water rinse. If you feel unwell, seek timely medical attention.
• 4. Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better).
• 5. Do not pour the resin in the resin vat into the unused resin, do not leave the resin in the resin vat for a long time without use to avoid resin pollution affect the printing effect(long time without the resin can be introduced into airtight containers or sealed with plastic wrap shading save).
• 6. Resin has a shelf life of up to 18 months.

Test specimens print settings:

Printing Recommendations:
Nozzle temperature: 220–240°C
Heated bed: Recommended 60-80°C
Print speed: Above 50 mm/s
Build platform: Glass bed, Kaptontape, Blue tape.

Access to all technical data sheets can be found here.

Introducing our new Refill PETG filaments, available in White, Black, Grey, Blue, Lipstick Red, and Tiger Orange. We designed these 1KG filaments to use with our REELfinity spool, which reduces waste and minimizes the impact on the environment.

Check out our assembly video of our REELfinity spool and Refill filaments and see how easy they are to set up!

PETG (polyethylene terephthalate) filament is a plastic thread that combines the properties of the ABS filament (solid, temperature-resistant, extremely durable) and the PLA filament (easy to print). Because of these properties, PETG is a filament for 3D printing that you must have. It is environmentally friendly and can be recycled after use. Precisely because of its excellent chemical stability, PETG is a material that meets all the requirements of the European Parliament and the Council on artificial substances in contact with food products and medicines. We can find it in water bottles, clothing fibres and food containers.

Our PETG filament is extremely durable, solid, and odourless. It is an excellent filament that combines a combination of strength and flexibility, so it is also used for printing mechanical products in robotics. Because it has an extremely minimal degree of shrinkage and bending, it is ideal for printing large products. It is a material that is distinguished by a gloss finish, and therefore it is also used for the printing of decorative elements.

For good results, you must print at a temperature of 220-240°C, and the printing table should be heated to 80-90°C. Please note that the temperature range of the print media may slightly differ depending on the use of other printers.

The advantage of PETG material is that is very easy to print;  you do not need a 3D printer with an enclosure, and the print speed is comparable to the printing of PLA filament. The PETG material has an excellent support structure due to the strength that helps to ensure that the layers are perfectly adhering during the printing, and consequently, the products are structurally strong and resistant to mechanical influences.

Flexible

 Durable

 Easy to print

Susceptible to moisture

 Surface scratches easily

Strength: High| Flexibility: Medium | Durability: High

Difficulty to use: Low  | Shrinkage/warping: Minimal

Soluble: No  |  Food safety: AzureFilm PETG is food safe (here is the certification)